Watch Dog Retrievers

About Watch Dog Retrievers

WatchDog Retriever

Retriever logs sensor data from its network of Pups (max 12 Pups per network).

• Single button operation: switch modes, download data, upload configuration, and check battery status
• Tri-colored LEDs indicate mode, battery level, data communication status, and configuration status
• Non-volatile memory preserves your logged data, even when the batteries are removed
• Transfer data or configuration information via flash drive or direct PC connection
• Internal flash memory on the Retriever will hold approximately 6 months of data for an example, a 10 Pup network using 15 minute logging intervals
• Spectrum-supplied USB flash drive will hold several years of data at the Retriever for a 10 Pup network using 15 minute logging intervals
• 3.5mm stereo port for computer connection USB cable (included)
• AUX port for wireless (DataScout Cellular or WiFi modem) communication connection
• Includes six non-rechargeable AA batteries (8 months typical life)
• DC port for optional AC/DC power adapter (Max 17VDC)
• Optional solar package includes rechargeable battery pack (2200 mAh, 7.2V NiMH), and 5W solar panel
• Retrievers are available in both 900 MHz (US customers) and 2.4 GHz bands (international customers)
• Retriever & Pups Launch Utility software included on USB flash drive

WatchDog Pups

Each Sensor Pup within the network is compatible with a diverse number of sensors and offers flexibility by allowing the grower to monitor the sensor inputs they require.

• Pups are available in 3 types: Sensor Pup, Station Pup, and Repeater Pup
• Single button operation: check battery status, signal strength, and join sensor network
• Tri-colored LEDs indicate battery level, signal strength, and data communication status
• Includes six non-rechargeable AA batteries (8 months typical life)
• Communication range of 2,500 ft (about 1/2 mile), line-of-sight installation recommended between Pups or Retriever
• Pups are available in both 900 MHz (US customers) and 2.4 GHz bands (international customers)

WatchDog Sensor Pups

• Connect up to 4 external sensors via 2.5mm stereo-plug
• Can monitor high, low, current, and average values for each sensor during each logging period

WatchDog Station Pups

• Connects to your existing WatchDog 2000 Series Full and Mini Weather Stations
• Sends all Weather Station sensor data to your Retriever network
• No external sensors, can only be connected to another device

WatchDog Repeater Pups

• Provide added range to WatchDog Retriever networks
• Serves as a hopping node around buildings or obstacles, or over high sections of your fields
• No external sensors can be connected

 

Detailed Product Information

External Sensors

• Customize each WatchDog Pup to monitor only the parameters you need
• Most Spectrum sensors are Pup-compatible, including :
  • Soil Moisture Sensors (WaterScout SM 300, WaterScout SMEC 300, and Watermark sensors)
  • LightScout Light Sensors (Solar Radiation, UV, and Quantum light)
  • Leaf Wetness Sensors
  • Temperature and Humidity Sensors
  • Barometric Pressure Sensors
  • CO₂ Sensors
  • Rainfall and Wind Speed/Direction Sensors (available late-2015)
  • We also offer Pre-Packaged Pups - these include a custom mounting bracket and sensors
  • See our full list of Sensors here

Enclosure

• Reliable, waterproof IP65 enclosure
• Weatherproof glands for sensor cables
• Lockable front door with the use of a padlock (not included)

Mounting

• Mounting bracket allows vertical or horizontal orientation
• Mounting hardware included - 1- inch U-bolt
• Antenna connection can be extended for higher placement for additional range between Pups & Retriever (antenna extension sold separately)

Communication Options

• USB flash drive (included with all Retrievers)
• Cellular network (See DataScout Modems below)
• Wi-Fi (see DataScout Modems below)

DataScout Modem (optional)

Communicates data to the web via Cellular or Wi-Fi options (more information on SpecConnect Web Portal can be found here)

• Model 110 CMDA Cellular Modem (US customers) with Solar Power (includes Modem, Solar Panel, and Rechargeable Battery Pack)
• Model 120 GSM/GPRS Cellular Modem (International customers) with Solar Power (includes Modem, Solar Panel, and Rechargeable Battery Pack)
• Model 130 HSPA+ Cellular Modem (Canada customers) with Solar Power (includes Modem, Solar Panel, and Rechargeable Battery Pack)
• Model 140 Wi-Fi Modem with Solar Power (includes Modem, Solar Panel, and Rechargeable Battery Pack)
• Model 140 Wi-Fi Modem with AC/DC Power (includes Modem and AC/DC Power Cord)

Configuration

• PC-based Retriever & Pups Launch Utility
  • Pre-loaded onto the provided USB memory stick
  • Available online at www.specmeters.com/support
• Configuration Parameters
  • Logging and upload intervals
  • Pup names
  • Sensor choices
  • Calculated sensor parameters (high / low / average)
• Data transfer and configurations may be done by
  • USB memory stick
  • Computer cable
  • SpecConnect web portal (subscription purchased separately)
• Pup configuration completed at Retriever and sent wirelessly to Pup network - Pups do not have a computer interface
• Spec 9 Pro or Basic Software not required, unless transferring data files/history to your PC

Capacity

• Measurement intervals: 5, 10, 15, 20, 30, or 60 minutes
• Non-volatile internal memory helps preserve data
• Pups - When communication is interrupted, internal memory buffers sensor data until reconnection to the Retriever is achieved
• Retriever - Will hold approximately 6 months of data. For example, a 10 Pup network using 15 minute logging intervals
• Spectrum-supplied USB memory stick - 4GB
  • Will hold several years of data at the Retriever. For example, a 10 Pup network using 15 minute logging intervals
  • Can use other customer-supplied USB drives

Accessories

Optional accessories include:

• Antenna Extension Cable & Mounting Bracket - Item 3925
• Tripod Mount - Rugged galvanized steel folding tripod and 3 ft (1 m) pole - Item 3396TP
• AC/DC Power Cord - Item 3629
• PC Direct Connection Cable - Item 3927
• USB Flash Drive - Item 3388USB
• Sensor Extension Cable - 20 ft (6.1 m) - Item 3664

Built for All Environments

Watch Dog Retrievers are engineered to withstand tough weather conditions, thanks to their corrosion-resistant materials and high durability. Whether you deploy them indoors or outdoors, the retrievers deliver reliable performance in temperatures from -10C to 50C. Their rugged construction makes them ideal for various applications year-round.


Perfect Grip for Easy Handling

Designed with an ergonomic grip, these retrievers promote comfortable use, reducing hand fatigue during extended tasks. The thoughtful design also enhances safety, limiting the risk of slippage and allowing for precise control, whether you're working in a family home or a commercial facility.


Low-Maintenance, Long-Lasting

Routine care is simple and requires minimal effort. The combination of sturdy plastic and metal offers outstanding durability, while their corrosion-resistant features ensure they remain effective with little need for repairs or special treatment. A wise choice for busy environments seeking efficiency and reliability.